7
JCB-MS-ST-NA
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
Always observe the proper use of your mitre
saw stand.
The mitre saw stand is designed for use with
tabletop devices such as mitre saws, scroll
saws, circular table saws, etc.
Electric power tools without suitable mounting
holes are not permitted to be fitted to the
mitre saw stand and shall not be operated in
conjunction with the mitre saw stand. Electric
power tools must be firmly bolted
to the mitre saw stand before starting
them up.
The mitre saw stand is also designed as a
workpiece support when working with mitre
saws, scroll saws, circular table saws, and other
similar electric power tools.
The maximum workpiece length is 10ft (3m).
Additional workpiece supports may have to be
used (e.g. a roller trestle) in order to prevent
longer workpieces tilting.
Attention: Ensure that the workpiece support is
secure and not tilted!
Do not use the mitre saw stand as a ladder or
as scaffolding. Ensure that all handgrips, nuts
and screws are tightened before use. Electric
power tools on this device shall not exceed an
overall height of 130 cm (4 ft). The maximum
permissible load is 200 kg (440 lbs). Ensure
that the mitre saw stand is on a level, firm and
stable floor. Any use beyond this is improper
use. The manufacturer is not responsible for
the resultant damages, the user bears this
risk alone.
Before starting the equipment
Check the device for transport damage.
Immediately report any damage to the
transport company that delivered the device.
