JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
PROBLEM SOLUTION
I CANNOT FIT THE BATTERY INTO THE BATTERY CHARGER.
WHY?
a) Check if the charger and the battery pack are specifically designed for working
together.
b) The battery can be inserted into the charger only in one direction. Turn the battery
around until it can be inserted into the slot, the indicator light should be red when the
battery is charging.
REASONS FOR DIFFERENT CHARGING TIMES
Battery charging time can be affected for many reasons which are not defects in your
product.
a) If the battery pack is only partly discharged it may be re-charged in less than 1 hour.
b) If the battery pack and ambient temperature are very cold then re-charging may
take 1-1.5 hours.
c) If the battery pack is very hot it will not re-charge because the internal temperature
safety cutout will prevent charging it. If the battery pack is very hot you must remove
your battery pack from the charger and allow your battery pack to cool first to ambient
temperature and then recharging can be started.
MAINTENANCE
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls
free of dust. Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
ENVIRONMENTAL PROTECTION
This product has been marked with a symbol relating to removing electric
and electronic waste. This means that this product shall not be discarded
with household waste but that it shall be returned to a collection system
which conforms to the European Directive 2002/96/CE. It will then be recycled
or dismantled in order to reduce the impact on the environment. Electric and
electronic equipment can be hazardous for the environment and for human health
since they contain hazardous substances.