HEAD TORCH MODE
1. Place XTRA on head ensuring the buttons are facing upwards and adjust the elasticated strap
for comfort.
2. Press the power button once to turn the light to full brightness, also illuminating the green led
indicator light adjacent to the power button. Press power button a second time to dim the bright-
ness to the lower brightness level.
3. To switch off press the power button a third time. The green led indicator light adjacent to the
power button will also switch off. Light shows green for charged and red for low battery.
WAVE / MOTION SENSOR MODE
1. For ease of use, or simply if the user has oily or dirty hands the XTRA has been design with a
none contact wave/motion sensor on / off switch.
2. To activate the wave motion sensor mode, press the motion mode button. This will trigger
the illumination of the blue and green Led indicator lights between the two control buttons. This
indicates the wave/sensor mode is now active.
3. Passing / waving your hand within 3cm of the light front will automatically toggle the light from
ON to OFF or OFF to ON. Movement can be up and down or towards the light to be detected
by the sensors.
4. To switch off this mode either press the power button activating the light on permanently, or
press the wave / motion button to switch all modes off.
WORKLIGHT MODE
1. An extremely useful feature of the XTRA is the work light mode. The front section of the
head torch can be easily removed from the headband base to provide a portable work light with
magnetic base and 360 degree swivel positioning mount.
2. Rotate main light anti-clockwise on the black mounting plate. This will release the worklight
from the head torch strap.
3. Click open base from light allowing light to be positioned on 360 degree ball adapter as re-
quired.
4. The base can be used as a stand on a level surface, or use the magnetic base to fix to any
metallic surface allowing the light to be used from multiple angles.
5. The worklight is switched ON and OFF in the same way as the Head Torch mod
6. The worklight can easily be re-attached to the head strap by locating the centre of the base
plate and rotating clockwise until attached.
OPERATION
