background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

PLUG REPLACEMENT (UK & IRELAND ONLY)

If you need to replace the fitted plug then follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in accordance with the following code:

Blue – Neutral

Brown – Live

As the colors of the wires in the mains lead of this appliance may not correspond 
with the colored markings identifying the terminals in your plug, proceed as 
follows. The wire which is colored blue must be connected to the terminal which is 
marked with N. The wire which is colored brown must be connected to the terminal 
which is marked with L.

 

Warning:

Never connect live or neutral wires to the earth terminal of the plug. Only fit 

an approved BS1363/A plug and the correct rated fuse.
Note: If a moulded plug is fitted and has to be removed take great care in 
disposing of the plug and severed cable, it must be destroyed to prevent 
engaging into a socket.

Note:

 If a moulded plug is fitted and has to be removed take great care in 

disposing of the plug and severed cable, it must be destroyed to prevent 
engaging into a socket.

 

13 Amp fuse approved

to BS1362

Connect

Blue to N

(neutral)

Outer sleeve

firmly clamped

Brown L(live)

Cable grip

Summary of Contents for JCB-HD900-2

















Reviews: