JCB-G8000PE
Instruction & User Manual
19
Operation
Starting
>
Insert the key into the Power Switch. Put the Power Switch into “ON”. Then turn the key into the start
position until the machine ignites into life. If the machines doesn’t start after 5-10 seconds, stop and try again.
>
Alternatively, you can pull the recoil starter grip lightly until resistance is felt, then pull it briskly. Do not allow
the recoil starter grip to snap back against the engine. Return it gently to prevent damage to the starter.
>
If the choke lever was moved to the CHOKE position to start the engine, gradually move it to the RUN
position as the engine warms up.
>
The output of the generator is based on Full engine speed. Ensure the choke lever is fully located in the RUN
position to ensure full engine speed.
Recoil Starter Grip
Choke Lever
