background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

5. BASE PLATE 

Adjusting the angle of the base plate 
(15) enables bevel cutting (See E). The 
base plate (15) must always be held 
firmly against the material being cut to 
reduce saw vibration, blade jumping 
or blade breakage (See F).

6. BASE PLATE ANGLE 

ADJUSTMENT

Loosen the base plate bevel lock 
button (6) and rotate the base plate 
(15) to set the bevel angle using the 
base plate bevel scale (4) provided. 
Then clamp the base plate (15) 
position using the lock (6) (See E). 
Finally, check the angle and ensure 
the base plate is firmly clamped. The 
angle markings on the base plate 
(15) are accurate for most general 
purposes but it is recommended for 
accurate work to set the angle with 
a protractor and make a test cut on 
other material. Do not use the depth of 
cut scale when making bevel cuts due 
to possible inaccuracy.

7. BEVEL TRACK 

The bevel track (9) fixed in front of 
the base plate is used as cutting 
guide. Always guide it along the 
cutting mark made on the workpiece 
for accurate cutting. 
The cutting mark 0° indicates the 
position of the saw blade for right-
angled cuts. 

20

21

6

4

16

25

24

12

23 22

21

F

20

21

6

4

16

25

24

12

23 22

21

E

Summary of Contents for JCB-CS1500

























Reviews: