12
JCB-20IL
Instruction & User Manual
Turning On/Off
Do not direct the light beam at persons or
animals and do not stare into the light beam
yourself (not even from a distance). Staring
into the light beam may result in serious
injury or vision loss.
WARNING!
m
Press the ON/OFF button to turn the
inspection light on and off.
The inspection light lamps can get very hot.
Keep the inspection light away from com-
bustible or fragile materials, as close contact
between the lamps and other materials may
cause damage to the inspection light, melt
materials, or start fires.
WARNING!
To Hang the Inspection Light
Only hang or mount the inspection light in a
suitable area, free from obstructions. Do not
hang the inspection light from any loose cord
or live electrical power cord. Ensure the
inspection light is securely installed to prevent
a falling object hazard. Failure to follow these
instructions can result in electric shocks or
other serious personal injuries.
WARNING!
m
Fold the inspection light in half at the joint.
m
Lift the J hook from the slot.
m
Use the J hook to hang the inspection light.
Adjustable Head
m
The inspection light head can be set in a
variety of positions by means of the swivel &
universal joints.
Do not place hands or fingers between
adjustable head and frame when positioning
inspection light to avoid trapping your fingers
or hands.
WARNING!
Maintenance
Switch off the tool and disconnect the power
(remove battery/unplug) before cleaning and
maintenance. This helps avoid the risk of
electric shocks and accidental starting.
WARNING!
m
Wipe the tool with a dry or damp cloth.
Do not use a wet cloth.
Do not use
detergent that contains solvent or
corrosive, abrasive additives.
This risks
damaging the surfaces of the tool.
m
Clear the tool vents and the lamp covers of
dust and dirt after each use.
Do not clean
ventilation holes by inserting sharp
objects in them, such as screwdrivers
and other similar objects.
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max 3. bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
