background image

10

JCB-18CS

Instruction & User Manual

 

m

To reduce risk of injury, only charge 
JCB rechargable batteries.

 The 

charger and battery packs are specifically 
designed to work together. Other types of 
batteries may burst causing fire and personal 
injury.

 

m

Do not allow any liquid to get inside 
the charger. 

Electric shock may result.

 

m

Do not expose the charger to rain or 
snow

 

m

Under certain conditions with the 
charger plugged into the power 
supply, the exposed charging contacts 
inside the charger can be shorted by 
foreign materials. 

Foreign materials of a 

conductive nature such as, but not limited 
to, steel, wool, aluminium foil or any buildup 
of metallic particles should be kept away 
from charger cavities. 

 

m

Always unplug the charger from 
the power supply when there is no 
battery in the cavity. 

 

m

Unplug the charger from the power 
supply before attempting to clean.

 

m

Do not operate the charger with a 
damaged cord or plug. 

Have them 

replaced immediately.

 

m

The charger is designed to operate 
on standard 230V household 
electrical power. Do not attempt to 
use it on any other voltage. 

 

m

This appliance can be used by 
children aged from 8 years and above 
and persons with reduced physical, 
sensory or mental capabilities or 
lack of experience and knowledge 
if they have been given supervision 
or instruction concerning use of 
the appliance in a safe way and 
understand the hazards involved. 

Children shall not play with the appliance. 
Cleaning and user maintenance shall not be 
made by children without supervision.

 

m

If the supply cord is damaged, it must 
be replaced by the manufacturer, its 
service agent or similarly qualified 
persons in order to avoid a hazard.

CHARGER SAFETY

Read all safety warnings, instructions 
and specifications provided with the 
charger

. Failure to follow all instructions 

listed below may result in electric shock, fire 
and/or serious injury. 

Save all warnings 

and instructions for future reference.

WARNING!

Summary of Contents for JCB-18CS
























Reviews: