background image

SO53 3LE

Customer Helpline 

0845 600 5526

SO53 3LE

Customer Helpline 

0845 600 5526

aDDitiOnaL SafEty RuLES fOR yOuR CORDLESS DRiLL DRivER

1.  Remove the battery pack 
from the drill before carrying out 
adjustments.
2.  Do not expose to rain or water.
3.  Do not store the battery pack 
in temperature over 40

o

C.

4.  Always charge the battery 
pack between temperature 0

o

C to 

30

o

C. Ideal charging temperature 

is 18

o

C to 24

o

C.

5.  Only use the charger and 
battery pack provided - do not 
use any other charger or battery 
pack not intended for use with 
this model.
6.  Avoid short circuit of the 
battery pack connections (screws 
& nails).
7.  Do not incinerate or burn the 
battery pack, it may explode.
8.  Do not charge a damaged 
battery pack.
9.  Replace any damaged supply 
cords on your charger.
10. Always disconnect the charger 
power supply before breaking the 
connections to the battery pack.
11. Battery pack and charger will 
be warm during charging this is 
normal.
12. When not in use, remove a 
charged battery pack from the 
charger.
13. Always remove the battery 
pack from the charger 
immediately after re-charging is 
completed.
14. Your drill and battery pack will 
be warm when working, this is 

normal.
15. Do not dispose of batteries 
in fire, or with household waste. 
Return exhausted batteries to 
your local collection or recycling 
point.
16. Always check walls, floors and 
ceilings for hidden power cables 
and pipes.
17. 

wear ear protection with 

cordless drill. 

Exposure to noise 

can cause hearing loss.
18. Accessories and metal parts 
can become very hot.
19. 

Hold power tool by insulated 

gripping surfaces, when 
performing an operation where 
the cutting accessory may 
contact hidden wiring. 

Cutting 

accessory contacting a "live" wire 
may make exposed metal parts of 
the power tool "live" and result in 
operator injury.

 

waRning: if a small 
amount of electrolyte 

should leak from the battery pack 
under extremes of temperature 
or after heavy use, then wash 
off immediately from your skin 
and hands using clean water.

 For 

eye contact, rinse thoroughly with 
clean water and seek medical 
treatment immediately.

Summary of Contents for DD12Li





















Reviews: