background image

Positec Australia Pty Limited 
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028  

Our goods come with guarantees that cannot be 

excluded under the Australian Consumer Law. 

You are entitled to a replacement or refund for 

a major failure and for compensation for any 

other reasonably foreseeable loss or damage. 

You are also entitled to have the goods repaired 

or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a 

major failure. To obtain compensation, you 

would need to provide documentary evidence of 

the loss or damage suffered, and documentary 

evidence that such loss or damage was a 

reasonably foreseeable consequence of a failure 

by us to comply with a consumer guarantee 

under the Australian Consumer Law. Such 

evidence may include photographs, statutory 

declarations, receipts or reports (e.g. from your 

doctor), depending on the loss or damage.

In addition to any rights and remedies you 

may have under the Australian Consumer Law 

and any other applicable law, if your JCB tool 

becomes defective due to faulty materials or 

workmanship within a period of 3 year from the 

date of purchase, we guarantee to:

• Replace or repair all defective parts, free of 

charge; or 

• Repair products free of charge; or 

• Replace the unit with a new or re-conditioned 

unit free of charge.

Your warranty is subject to the following 

conditions:

• Battery packs are guaranteed for a 12 month 

period only.

• The tool has not been misused, abused, 

neglected, altered, modified or repaired by 

anyone other than an authorized service centre.

• Only genuine 

JCB

 parts that fall under normal 

customer maintenance in accordance with the 

instruction manual have been used on or with 

the product.

• The tool has been subjected to fair wear and 

tear.

• The tool has not been used for trade or 

professional purposes.

• The tool has not been used for rental purposes.

• The tool has not sustained damage through 

foreign objects, substances or accidents.

Your warranty does not cover:

• Components that are subject to natural wear 

and tear caused by use in accordance with 

operating instructions.

• Unauthorized/improper maintenance/

handling or overload are excluded from this 

warranty as are accessories such as bulbs, 

blades and bits, etc.

• Accessories supplied with the tool.

For claims under this 

JCB

 warranty, please 

contact the 

JCB

 Helpline. To make a claim you 

will need to provide proof of purchase in the form 

of a valid receipt that displays the date and place 

of purchase. Any expense you incur in claiming 

under the 

JCB

 warranty will be borne by you.

Helpline 1300 889 028

This guarantee statement does not replace but is 

in addition to your statutory rights.

This warranty applies only to the original

purchaser and may not be transferred.

All repairs and replacement tools will be

covered by the limited warranty of the balance

of the warranty period from the date of the

original purchase.

This 

JCB

 warranty is provided by Positec

Australia Pty Limited ACN 101 682 357 of 25

Research Drive, Croydon South VIC 3136

Address for the return of the products: The

Point of Purchase

Summary of Contents for AG720





















Reviews: