jcb 926, Operator'S Manual

Page: 24 / 31

About the Product
Safety Labels
13 9821/7950-3 13
Safety Labels
General
Warning! Safety labels on the machine warn you of particular hazards. You can be injured if you do not
obey the safety instructions shown.
The safety labels are strategically placed around the product to remind you of possible hazards.
If you need eye-glasses for reading, make sure you wear them when reading the safety labels. Do not over-
stretch or put yourself in dangerous positions to read the safety labels. If you do not understand the hazard
shown on the safety label, then refer to Safety Label Identification. Refer to: About the Product > Safety Labels
> Safety Label Identification (Page 13).
Keep all of the safety labels clean and readable. Replace a lost or damaged safety label. Make sure the
replacement parts include the safety labels where necessary. Each safety label has a part number printed on
it, use this number to order a new safety label from your JCB dealer.
Safety Label Identification
Figure 10.
817/70014
B J
D
C
E
H
G
F
817/70029
817/70040-2
A
817/70004
817/70011
817/70013-4
817/70012
332/P4712-1
817/70040-2
332/P4679
Table 6. Safety Labels
Item Part No. Description Qty.
A 817/70011 Fall from raised attachment. Do not stand or ride on the bucket or forks. 1
B 817/70094 Burns to fingers and hands. Stay a safe distance away. 1
C 817/70029 Crush hazard. Wear seat belt. 1
D 817/70040 Electrical hazard. Stay a safe distance away from power lines. 1
E 817/70014 Warning. Read the Operator’s Manual before you operate the machine. 1
F 332/P4712 Noise warning. Wear ear protection. 1
G 817/70012 Run over hazard. Start the engine from the operator's seat only. Do not
short across the terminals.
1
H 332/F5860 Hot fluid under pressure. Read the Operator's Manual. 1