background image

1

1

9831-0300-01

Introduction

About this Manual

Model and Serial Number

This supplement provides information for the following
models in the JCB machine range:

– Pole Master Plus from Machine serial number

02442701 onwards

Using this Supplement

This supplement must be used in conjunction with the
Operator Manual supplied for your machine. Make sure
the Machine Operator Manual is present in your machine
at all times. If there is no Operator Manual in your machine,
do not use the machine and consult your JCB dealer for
help.

4CX Backhoe Loader

Study this supplement and the correct Operator Manual
before using the machine and before carrying out any
maintenance work on the machine. You must always
understand and observe the relevant laws and regulations.
If you are unsure about anything, ask your JCB dealer.

This supplement is arranged to give you a good
understanding of the additional features and controls of the
machine and its safe operation. It also contains specific
data to the machine. Read this supplement from front to
back before using the machine for the first time. Particular
attention must be given to all the safety aspects of
operating and maintaining the machine.

Do not operate the machine without this supplement.

Treat this supplement as part of the machine. Keep it clean
and in good condition. Replace this supplement
immediately if it is lost, damaged or becomes unreadable.

If there is anything you are not sure about, ask your JCB
dealer or employer. Do not guess, you or others could be
killed or seriously injured.

The illustrations in this supplement are for guidance only.
Where the machines differ, the text and or the illustration
will specify.

The manufacturer's policy is one of continuous
improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will
be accepted for discrepancies which may occur between
specifications of the machine and the descriptions
contained in this publication.

Cross References

In this publication, page cross references are made by
presenting the subject title printed in bold, italic and
underlined. It is preceeded by the 'go to' symbol. The
number of the page upon which the subject begins, is
indicated within the brackets. For example: 

K

Cross

References (

T

1)

Find manuals at https://best-manuals.com

Summary of Contents for 4CX AEC - POLE MASTER PLUS












Reviews: