background image

 Introduction

 About this Manual

1

9831/3950-1

1

Introduction

About this Manual

Model and Serial Number

This manual provides information for the following model(s) in the JCB machine range:

Model

From:

To:

4160

2185000

4190

2185000

4220

2185000

Using the Manual

This operator's manual is arranged to give you a good understanding of the machine and its safe operation.

It also contains maintenance and technical data.

Read this manual from the front to the back before you use the machine for the first time, even if you have used

machines of a similar/same type before as the technical specification, systems and controls of the machine

may have changed. Particular attention must be given to all the safety aspects of operating and maintaining

the machine.

If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could

be killed or seriously injured.

The general and specific warnings in this section are repeated throughout the manual. Read all the safety

statements regularly, so you do not forget them. Remember that the best operators are the safest operators.

The illustrations in this manual are for guidance only. Where the machines are different, the text and or the

illustration will specify.

The  manufacturer's  policy  is  one  of  continuous  improvement.  The  right  to  change  the  specification  of  the

machine  without  notice  is  reserved.  No  responsibility  will  be  accepted  for  discrepancies  which  may  occur

between specifications of the machine and the descriptions contained in this manual.

All of the optional equipment included in this manual may not be available in all territories

Left-Hand Side, Right-Hand Side

In this manual, 'left' and 'right' mean your left and right when you are seated correctly in the machine.

Figure 1.

A

B

A

Left

B

Right

Cross References

In this manual, cross references are made by presenting the subject title in blue (electronic copy only). The

number of the page upon which the subject begins is indicated within the brackets. For example: 

Refer to:

Cross References (Page 1).

 

Summary of Contents for 4160
































Reviews: