1 - 3
Checking the Seat Belt Condition and
Security
!
WARNING
When a seat belt is fitted to your machine replace it with
a new one if it is damaged, if the fabric is worn, or if the
machine has been in an accident. Fit a new seat belt
every three years.
2-3-1-7/1
Inspect the seat belt for signs of fraying and stretching.
Check that the stitching is not loose or damaged. Check that
the buckle assembly is undamaged and works correctly.
Check that the belt mounting bolts are undamaged, correctly
fitted and tightened.
Section 3
Routine Maintenance
9803/3280
Section 3
1 - 3
Issue 1
Seat Belt
S170520
Fire Extinguisher
(when fitted)
Checking the Fire Extinguisher
Check the fire extinguisher for damage, security and signs of
leaking.
Check that the gauge
B
indicates that the extinguisher is
charged ie. the needle is in the GREEN segment.
Note
: If the needle is in or very near the RED segment at
either end of the gauge, the extinguisher must be serviced or
replaced.
Make sure the safety pin is fitted and secure.
The extinguisher should be serviced every 12 months by a
suitably qualified person.
B
