background image

12

21-18MT

Instruction & User Manual

The vibration emission value of the power 
tool is tested under EN 62841-1 and EN 
62841-2-11, and can vary during operation 
depending on the following usage conditions:

WARNING!

 

m

How the tool is used and the materials 
being cut or drilled.

 

m

The tool being in good condition and well 
maintained.

 

m

Using the correct accessory for the tool and 
ensuring it is sharp and in good condition.

 

m

The tightness of the grip on the handles and 
if any anti-vibration accessories are used.

 

m

The tool being used as intended by its 
design and these instructions.

 

m

The declared vibration total value may also 
be used in a preliminary assessment of 
exposure.

THIS TOOL MAY CAUSE HAND-ARM 

VIBRATION SYNDROME IF USAGE IS 

NOT ADEQUATELY MANAGED.

To be accurate, an estimation of exposure 
level in the actual conditions of use should 
also take account of all parts of the operating 
cycle. These include times when the tool is 
switched off and when it is running idle but 
not actually doing work. This may significantly 
reduce the total exposure level over the 
working period, helping to minimize your 
vibration exposure risk.

WARNING!

 

m

ALWAYS use sharp and undamaged bits, 
chisels, drills and blades.

 

m

Maintain this tool in accordance with these 
instructions and keep well lubricated (where 
appropriate).

 

m

If the tool is to be used regularly then invest 
in anti-vibration accessories.

 

m

Avoid using tools in temperatures of 10

°

or less.

 

m

Plan your work schedule to spread any high 
vibration tool use across a number of days.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 62841-1 and 
EN 62841-2-11

No Load

Vibration Emission Value (a

h

)

9.3 ms

-2

Uncertainty (K)

1.5 ms

-2

Sanding

Vibration Emission Value (a

h

)

3.9 ms

-2

Uncertainty (K)

1.5 ms

-2

Summary of Contents for 21-18MT





















Reviews: