background image

18

21-18BLID

Instruction & User Manual

WARRANTY STATEMENT

JCB Power Tools are guaranteed against manufacturing defects for 
up to 3 years from date of purchase by simply registering your prod-
uct online within 30 days. Proof of purchase required. This does not 
affect your statutory rights. 

To register your JCB Power Tool, please visit: jcb-tools.com

Online registration is required within 30 days to receive a warranty certificate to activate your 
standard 3 year warranty. Registration is only available online via www.jcb-tools.com. You will 
need your original sales receipt, the model number and the serial number (if applicable) of your 
product. Kits comprising of two or more tools are excluded from single registration and must 
registered individually for full warranty cover. 

Upon successful registration, a warranty certificate will be available to download, print or save as 
a PDF document. The relevant warranty certificate together with the original sales receipt will be 
required in the event of any claim within the warranty period.

Should you choose not to register your product within 30 days of purchase, your statutory 
consumer rights will not be affected. You will need the original sales receipt as proof of purchase in 
the event of a warranty claim.

Warranty cover commences from the date of purchase on the retail sales receipt and is valid only 
for JCB Tools products purchased within the UK bearing the CE and UKCA mark and a visible 
serial number.

In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty 
period, JCB Tools may repair the product by replacing defective parts free of charge at our 
discretion. In the event parts are irreplaceable JCB Tools may replace your product free of 
charge. The original product will remain the property of JCB Tools in this situation. 

The above repair or replacement of products will be undertaken providing that:

 

m

The product has been subject to fair wear and tear only.

 

m

The product has not been subject to accidental or cosmetic damage.

Summary of Contents for 21-18BLID





















Reviews: