15
JCB-20BLDD
Instruction & User Manual
Never hold the chuck sleeve in one hand
and run the power tool to tighten or release
accessories. This risks serious personal injury.
WARNING!
m
Connecting the battery
m
Connect the battery to the battery socket
on the tool so that it clicks into place.
m
Removing the battery from the
power tool
m
Press the battery release button (13) and
remove the battery from the tool.
m
Replacing Bits/Drills
m
Place the power tool on a stable surface, for
example a work bench
m
Open the chuck by holding the chuck sleeve
in a firm grip and turning it anticlockwise
until the chuck jaws open and the accessory
can be inserted. The chuck is designed so
that it can easily be tightened or released
with one hand.
The spindle locks automatically when the
chuck stops rotating.
NOTE
m
Insert the accessory as far as it will go into
the chuck. Point the power tool up slightly
so that the accessory does not fall out.
m
Tighten the chuck sleeve clockwise so that
the accessory is gripped firmly by the chuck
jaws.
Check that the accessory is straight, centred
and not askew. If the accessory is not
properly positioned it could fly out when
starting the power tool. Check that the
chuck jaws rest on the flat surfaces of the
accessory.
NOTE
m
Tighten the chuck until it grips the accessory.
Grip the chuck firmly and turn it clockwise.
ON/OFF Trigger
m
Gradually press the ON/OFF Trigger to start
the power tool
m
The tool has variable speed:
m
Gradually squeeze the ON/OFF Trigger
more to increase the chuck rotation speed.
m
Release it slightly to reduce the speed.
m
Completely release the ON/OFF Trigger to
stop the chuck from rotating..
Forward/Reverse Direction
Selector Switch
Only use the Direction Selector Switch (6)
when the power tool is stopped and the
chuck is not rotating.Otherwise the tool can
be damaged.
WARNING!
m
Use the Direction Selector Switch to
choose between clockwise or anti-clockwise
rotation.
m
When the direction selector switch is in
the middle position the ON/OFF trigger is
locked and cannot be pressed.
m
Always put the direction selector
switch in the middle position before
putting the tool down
. This reduces the
risk of accidentally starting it.
High torque power tool, use with care.
WARNING!
All manuals and user guides at all-guides.com
