Table of Contents
JC-MR-2836-LED USER MANUAL
2
ELECTRICAL SAFETY INSTRUCTIONS
All connections must be installed by a licensed electrician, in accor-
dance with current building codes. Consult a qualified electrician.
IMPORTANT
Always switch off the electrical supply at the main during installa-
tion and maintenance. It is recommended that the circuit breaker is
switched off for the necessary circuit before installation commences.
Fitting in bathrooms is subject to the appropriate building code regula-
tions.
◊ This product is NOT suitable to outside zones.
◊ It is also NOT suitable for installation in saunas, steam rooms or
shower cubicles.
◊ This product is only suitable for permanent installation.
◊ DO NOT connect to a trailing plug and socket outlet .
◊ This product is only suitable for indoor use.
◊ Do not attach the product to surfaces that are damp or otherwise-
electrically conductive.
INSTALLATION CARE AND SAFETY
◊ Wear suitable eye protection when drilling.
◊ Take care when using power tools.
◊ Beware of hidden cables or pipes.
◊ Take care if drilling on tiled surfaces in case the drill slips.
◊ A piece of masking tape applied to the wall before marking out the
fixing holes will stop the drill from wandering.
IMPORTANT
Do not strike glass components with hard or pointed items.
DO NOT place very hot or very cold items against or in close proximity
to glass surfaces unless an adequately thick insulation material is
used to prevent such items comin in contact with the glass. The nom-
inal thickness of the mirror glass used in this product is 1/4” and is
flm backed for safety. If the glass becomes chipped or broken replace
immediately.
Electrical Safety Instructions ...............................................................................................................................................................
Cleaning .................................................................................................................................................................................................
Installation ...........................................................................................................................................................................................
Specifications .......................................................................................................................................................................................
2
2
3
4
Electrical Safety Instructions
CLEANING
It is recommended that the unit is cleaned with a soft, dry, non abrasive cloth when turned off. never use cleaning
agents or abrasive materials on any type of surface finish. Do not allow moisture to come into contact with the electrical
components.
Cleaning
