SUPPLIER NO. 735464
FOR MISSING PART, CONTACT MODUS FURNITURE INT : L.A. CA. PH. (800) 827-2129, 8.00 AM TO 5.00 PM PST
2
BRACKET INTO
THE UNIT
PLASTIC
ANCHOR
BRACKET INTO
THE WALL
YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE
AND THE USE OF FURNITURE TIPPING RESTRAINT IS HIGHLY
RECOMMENDED FOR PROTECTION AGAINST THE UNEXPECTED
TIPPING OF FURNITURE DUE TO IMPROPER USE.
READ INSTALLATION INSTRUCTION BELOW AND ON PLASTIC
PACK.
IMPORTANT :
TIPPING RESTRAINT INSTALLATION INSTRUCTIONS
ATTACH ONE OF THE MOUNTING BRACKETS SECURELY TO
THE BACK EDGE OF THE FURNITURE. USE THE SHORTER
SCREWS.
DETERMINE WHERE FURNITURE IS TO BE PLACED AND MARK
LOCATION ON THE WALL FOR THE MOUNTING BRACKET
SCREW HOLE APPROXIMATELY 2 BELOW THE BRACKET
MOUNTED TO THE EDGE OF THE FURNITURE.
DRILL A 3/16 HOLE IN THE WALL. PRESS THE PLASTIC
ANCHOR INTO THE HOLE AND GENTLY TAP UNTIL THE FLANGE
ON THE ANCHOR IS AGAINST THE WALL SURFACE.
POSITION THE BRACKET OF THE ANCHOR AND USE THE
LONGER SCREW TO SECURELY ATTACH THE BRACKET TO THE
WALL.
PLACE THE FURNITURE SO THE BRACKET ON THE BACK EDGE
IS IN LINE WITH THE BRACKET ON THE WALL.
LACE AN END OF THE NYLON RESTRAINT STRAP DOWN
THROUGH EACH BRACKET. BRING BOTH ENDS TOGETHER
AND SLIDE THE BEADED END OF THE STRAP THROUGH THE
KEYHOLE SHAPED SLOT IN THE OTHER END UNTIL SNUG.
PULL DOWN ON THE BEADED END UNTIL IT SNAP LOCKS INTO
THE KEYHOLE SLOT.
TO DOUBLE LOCK, RETURN THE BEADED END BACK THROUGH
THE KEYHOLE AS SHOWN.
CHECK TO MAKE SURE THE STRAP IS SECURELY LACED AND
LOCKED TO THE BRACKETS.
1.
2.
3.
6.
4.
5.
8.
7.
WALL
INSTRUCTION FOR ADJUSTING LEVELER :
WHEN THE SIDE PANELS ARE NOT LEVEL EACH OTHER, FOLLOW THE STEPS BELOW
THE LEVELER LOCATED
ON FRONT SIDE OF
EACH POST.
MAKE SURE THE
LEVELER IS FLUSH
WITH THE BOTTOM
EDGE OF THE POST
ADJUST THE LEVELER
U N T I L T H E S I D E
P A N E L S H A S S A M E
L E V E L E A C H OT H E R
BY TURNING IT.
