JC MACHINERY & TOOLS INC.
Quality We Trust
3
2.
The description of Automatic Tape Welder
v.
How to change Overlap Banner Welder to Tape Welder
1. Loosen belt wheel fix nut( 38 ), take down belt wheel set ( 39 )
、
circular silica
belt ( 27 );
2. Loosen pressure roller fixed screw ( 28 ), take down gasket ( 42 ) and overlap
Pressure roller ( 29 ), assemble the drive shaft coupling cover ( 44 )
、
tape
pressure roller ( 36 )
、
pressure roller stopper ( 35 ) and inner hexagon screw
( 43 ) in proper cord;
3. Loosen hot air nozzle fixed screw ( 41 ), take down overlap hot air nozzle
( 25 ), and then replace into tape hot air nozzle ( 37 ) ;
4. Loosen guide wheel nut ( 9 ), take down guide wheel shaft sleeve ( 10 ) and
guide wheel set ( 40 ), reassemble guide wheel set as the below pictures
show;
5. Assemble tape limit set ( 34 ) and tape fixed set ( 30 ).
30. Tape fixed set
33. Disc Nut
36. Tape pressure roller
31. Tape fixed cover
34. Tape limit set
37. Tape hot air nozzle
32. Tape circular disc
35. Pressure roller stopper
