JC LAB J-SCOPE BIMC-A03A-W3, Manual, Page: 31 / 59

Page 29
10.0 JC CAM Software Instruction
Manual
exposure:
Drag to adjust the exposure parameters of the
device according to the use of the environment.
This parameter is adjusted on the basis of
automatic exposure. This parameter is only valid if
the "automatic exposure" option is not checked.
Regional
exposure:
Select an area as the reference for exposure.
Single
exposure:
Perform once exposure.
Automatic
white balance
function:
When checked, the device will perform automatic
white balance according to the environment used;
When not checked, it can be adjusted by "manual
white balance" below. Note: abnormal color may
occur when taking rich color images. A manual
calibration of the automatic white balance is
required. To do this, place a white paper on field
of view, remove the "automatic white balance"
box and check it again. Let the device perform an
automatic white balance. When you're done,
unchecked the "auto white balance" box.
Manual white
balance
function:
Drag to adjust the white balance parameter of the
device according to the usage environment. This
parameter is adjusted up and down on the basis
of automatic white balance. This parameter is
only valid if the "automatic white balance" option
is not checked.