16
3. inStaLLation GUiDe
Centred on the planned location of the fireplace, install a hearth made of approved non-combustible
material such as ceramic tiles, stone, masonry or concrete etc.
4. installing the hearth non-Combustible
for added height(floor to ceiling), install the additional pipes(if required), onto the dropper box(using the
3 screws tf M8x16).
the connecting flue should not include more than two 45° offsets (i.e. more
than one non-vertical portion), the angle of these offsets should not exceed
45° with the vertical.
important:
When a controlled mechanical ventilation includes an electric
extractor, it is absolutely necessary to stop operation of the fireplace. The
electric extractors of the kitchen, the bathroom, or the toilets, should also be
switched off when operating the fireplace.
lea 998, Zelia 908 and tatiana 997
• install the
lea 998, tatiana 997
and
Zelia 908
onto the dropper box (or the additional pipe if
requested) with the lower shelf of the fireplace 450 mm above the finished hearth.
installing the fireplaCe
5. installing the internal Components
2. installing the additional pipes
3. 45° offsets of ConneCting flues
eva 992
install the
eva 992
canopy onto the dropper box (or the additional pipe if required) with the lower edge
of the fireplace hood 820mm above the finished hearth. Make sure that all the fasteners are tight.
centre the base of the
eva 992
on the non-combustible hearth in perfect vertical alignment with the
hood and bolt it down making sure that the exact 460mm clearance between the canopy and the base is
maintained.
tatiana 997, lea 998 and Zelia 908
install the baffle plate : ensuring the flat surface is positioned upwards, proceed to gently position the
plate on the lugs located on the inside of the fireplace. Once in position ensure the plate sits securely,
the baffle plate should not rock or shift when touched if placed correctly. install the ash pan and the ash
grate on the base of the fireplace, it should be noted an ash pan is
not
supplied with the
tatiana 997.
eva 992
install the baffle plate : ensuring the flat surface is positioned upwards, proceed to gently position the
plate on the lugs located on the inside of the fireplace. Once in position ensure the plate sits securely,
the baffle plate should not rock or shift when touched if placed correctly. install the ash pan and the ash
grate on the base of the fireplace. Install the ring screw caps at the bottom of the base if necessary
Install the 2 shutters at the bottom of the base, in case the fireplace is not connected to an air intake
from the floor.
minimum
300mm flue
