4-6
©2019 JBT LEKTRO, INC. All rights reserved.
October 2019
LEKTRO 88/89 SERIES - OPERATION MANUAL
> If the vehicle does not move when the accelerator is pressed, lift your foot and let the
accelerator pedal return before trying again. If this fails, see the
General
section of the
88/89 Series
Service Manual
.
•
Seats (7):
Your LEKTRO tractor is equipped with two seats (Operator / Passenger, or
Operator A / Operator B).
4.3.1
OPERATOR SEAT(S)
Each seat is equipped with several operator safety and/or comfort controls.
Each seat may include some or all of the following components and controls:
•
Seat Belt (1;
if equipped
):
Operate the seat belt in the same manner as an automotive seat
belt. If the seat belt uses a manual recoil spool, pull the release lever on the belt storage
spool to lock the belt length. Press this lever to retract the belt when unfastening the seat
belt.
•
Seat Height Adjustment Knob/Lever (2):
Use this control to adjust the seat to the desired
height.
•
Forward/Aft Adjustment Lever (3):
Adjust the seat position by pulling the adjustment lever,
sliding the seat to the desired position, and then releasing the adjustment lever.
•
Arm Rests (4):
Lift or lower the arms rests as desired for comfort and ease of access.
•
Ride Comfort Knob (5):
Adjust the seat suspension firmness by rotating the comfort knob
until the window on the left front side of the seat base indicates the operator’s weight.
1
1
2
3
4
4
5
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
