background image

C120/C300 
Quick Start Guide 

28 

08/29/2008 

 

Software Licensing Terms and Conditions 

  
Software supplied with each JBM Electronics' product remains the exclusive property of 
JBM Electronics.  JBM grants with each unit a perpetual license to use this software with 
the express limitation that the software may not be copied or used in any other product 
for any purpose.  It may not be reverse engineered, or used for any other purpose other 
than in and with the computer hardware sold by JBM Electronics.  
 

FCC Compliance Statement 

 

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC rules.   
 
These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment.   
 
This equipment generates, uses and can radiate radio frequency energy; and if not 
installed and used in accordance with the instructions, may cause harmful interference to 
radio communications.   
 
Operation of this equipment in a residential area is likely to cause harmful interference to 
radio communications, in which case the user will be required to correct the interference 
at their own expense.  
  

Warning:

 Changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment.  

Information To The User  

If this equipment causes interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:  
  
In order to meet FCC emissions limits, this equipment must be used only with cables that 
comply with IEEE 802.3 
  
If necessary, the user should consult the dealer or an experienced radio/television 
technician for additional suggestions.   
 
The user may find the following booklet prepared by the Federal Communications 
Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”.  
 
This booklet is available from: 

U.S. Government Printing Office 
Washington, DC  20402 
Stock No. 004-000-00345-4 

Summary of Contents for C120F






























Reviews: