background image

8

Venue Performance Series User’s Guide

SECTION 3 : 

INTRODUCTION TO VP SERIES 

POWERED LOUDSPEAKER SYSTEMS

VP (Venue Performance) Series

The VP Series is a family of powered integrated audio loudspeaker systems featuring the JBL DrivePack

®

 

amplifier modules, designed in cooperation with Crown International.  The JBL DrivePack features cutting-
edge technology such as patented high efficiency Class-I power amplifier circuitry. Loudspeaker components 
include patented JBL Differential Drive

®

 woofers.  The full-range models feature the JBL 2452H-SL large 

format 1.5” exit compression driver. This high frequency driver is coupled to a JBL Progressive Transition

™ 

(PT) Waveguide for excellent pattern control, smooth frequency response, and low distortion. Waveguides 
can be rotated for either a horizontal or vertical orientation.

This guide covers the following models: 

VP7212/64DP - 12” two-way with 60 x 40-degree waveguide
VP7212/95DP - 12” two-way with 90 x 50-degree waveguide
VP7215/64DP - 15” two-way with 60 x 40-degree waveguide
VP7215/95DP - 15” two-way with 90 x 50-degree waveguide
VP7315/64DP - 15” three-way with 60 x 40 degree waveguide
VPSB7118DP - 18” subwoofer

VP7212/64DPDA - with optional AES/EBU input module
VP7212/95DPDA - with optional AES/EBU input module
VP7215/64DPDA - with optional AES/EBU input module
VP7215/95DPDA - with optional AES/EBU input module
VP7315/64DPDA - with optional AES/EBU input module
VPSB7118DPDA - with optional AES/EBU input module

VP7212/64DPAN - with optional Analog Audio/Network input module
VP7212/95DPAN - with optional Analog Audio/Network input module
VP7215/64DPAN - with optional Analog Audio/Network input module
VP7215/95DPAN - with optional Analog Audio/Network input module
VP7315/64DPAN - with optional Analog Audio/Network input module
VPSB7118DPAN - with optional Analog Audio/Network input module

VP7212/64DPCN – with optional CobraNet input module
VP7212/95DPCN – with optional CobraNet input module
VP7215/64DPCN – with optional CobraNet input module
VP7215/95DPCN – with optional CobraNet input module
VP7315/64DPCN – with optional CobraNet input module
VPSB7118DPCN – with optional CobraNet input module

Summary of Contents for VP Series

















































Reviews: