Page 14
VERTEC SYSTEMS
SUSPENSION HARDWARE & ASSEMBLY NOTES
Arrays of similar V
ER
T
EC
Model
•
Each V
ER
T
EC
model uses the matching model of Array Frame (VT488X-AF) or
Short Frame (VT488X-SF) to create clusters of the same model.
•
These same frames can also be used to ground stack the various systems.
Arrays of Combined V
ER
T
EC
Models
•
Clusters of combined models (i.e. VT4887s attached under a VT4889) use
ADAPTER FRAMES to interconnect the various models.
•
These frames are the:
VT4800-DA to adapt VT4887 under VT4889 or VT4880.
VT4800-CA to adapt VT4887 under VT4888.
VT4800-UA to adapt any model to any model.
Ground stacking capabilities
•
All V
ER
T
EC
models can be ground stacked using the matching model of AF or SF
frames.
•
Up to 6 V
ER
T
EC
cabinets can be safely stacked using the appropriate V
ER
T
EC
AF
frame and up to 4 cabinets when using the SF Frame.
General rigging recommendations
•
Only qualified personnel should perform suspension of audio systems!
•
Users should inspect every component to be rigged every time the system is used.
•
Users should verify that all Quick Release Pins in the V
ER
T
EC
cabinets and in the
suspension frames are properly locked when rigging the system.
