manualshive.com logo in svg

JBL Synthesis SDP-5, User Manual

Share
Download
JBL Synthesis SDP-5 User Manual Download Page 122

MODE ADJUST

SDP-5

5-19

The table below indicates the conditions in which Dolby Digital
Surround EX decoding is engaged.

•

Dolby Digital Surround EX decoding is engaged when the EX
DECODING parameter is set to ON, or the EX DECODING
parameter is set to AUTO and a flagged 5.1-channel Dolby
Digital source recorded with Dolby Digital Surround EX is
detected.

•

Dolby Digital Surround EX decoding is not engaged when the
EX DECODING parameter is set to OFF, or the EX DECODING
parameter is set to AUTO and a non-flagged 5.1-channel Dolby
Digital source recorded without or without Dolby Digital
Surround EX is detected.

•

Listening mode name differs depending on the encoding
present in the input source, the EX DECODING parameter
setting, and the speaker setup.

–

The DOLBY DIGITAL EX listening mode is available when
Dolby Digital Surround EX decoding is engaged.

–

The DOLBY DIGITAL listening mode is available when
Dolby Digital Surround EX decoding is not engaged.

–

The DOLBY DIGITAL EX listening mode cannot be activated
unless both side and rear speakers are present.

Note:

The SDP-5 cannot automatically detect Dolby Digital
Surround EX encoding in non-flagged 5.1-channel
Dolby Digital sources. A non-flagged source does not
include information in the input signal that identifies
Dolby Digital Surround EX encoding.

5.1-Channel Dolby

Digital EX (Non-Flagged)

5.1-Channel Dolby

Digital EX (Flagged)

5.1-Channel

Dolby Digital

DOLBY DIGITAL

DOLBY DIGITAL EX

DOLBY DIGITAL

EX DECODING: AUTO

DOLBY DIGITAL EX

DOLBY DIGITAL EX

DOLBY DIGITAL EX

EX DECODING: ON

DOLBY DIGITAL

DOLBY DIGITAL

DOLBY DIGITAL

EX DECODING: OFF

Parameter
Setting

Input

Source

Summary of Contents for Synthesis SDP-5
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands