JBL SYNTHESIS SDA-2200, Quick Start Manual

Page: 8 / 19

EN-8
POWER – AC PLUG
Connect the correct
AC plug here.
VOLTAGE SELECT
Ensure that the voltage
selected matches the local
power supply.
PRE-AMPLIFIER INPUTS
Connect the phono outputs of
your pre-amplifier.
See “Connecting Sources and
Loudspeakers” on page EN-12.
SPEAKER TERMINALS
See “Connecting Sources
and Loudspeakers” on
page EN-12.
Please read the sections “Placing the Unit”,
“Power” and “Interconnect Cables” on page
EN-6 before connecting your SDA-2200
amplifier!
TRIGGER IN / OUT
Trigger IN allows the SDA-2200 to be turned ON or OFF by an external
source. Trigger OUT allows the SDA-2200 to control the power state of other
connected equipment.
See “Trigger IN/OUT” on page EN-9.
USB
For software upgrades only.
See “USB” on page EN-9.
NETWORK
This connection allows for remote
control from a third-party home
automation system or computer.
See “Network and RS232” on page EN-9.
RS232
This connection allows for remote
control from a third-party home
automation system or computer.
See “Network and RS232” on page EN-9.
Rear Panel Connections and Controls SDA-2200
BALANCED XLR AUDIO INPUTS
Connect the XLR output of your
pre-amplifier.
See “Connecting Sources and
Loudspeakers” on page EN-12.
INPUT SWITCHES
Allow the SDA-2200 to be configured in
different operational modes.
See “Connecting Sources and
Loudspeakers” on page EN-12.
PRE-AMPLIFIER OUTPUT
OUTL and OUTR provide a copy of
the signal applied to the IN L and IN
R phono sockets only, not the XLR.
Note:
This is a passive output,
no additional filtering or
amplification is applied.
DANTE PORTS
See “Dante Ports” on
page”Switching On”
on page EN-11.