background image

L810

L820

LC2

Description

3-Way, 5-1/4" Bookshelf/

4-Way, 6" High-Performance, 

4-Way, Dual 6" 

Wall-Mount Satellite

Mirror-Image,

Wall-Mount Center

Wall-Mount Satellite

Maximum 

150W

150W

150W

Recommended
Amplifier Power*

Power Handling 

75W/300W

75W/300W

75W/300W

(Continuous/Peak)

Nominal Impedance

8 Ohms

8 Ohms

8 Ohms

Sensitivity (2.83V/1m)

88dB

90dB

92dB

Frequency 

60Hz – 40kHz

55Hz – 40kHz

50Hz – 40kHz

Response (±3dB)

Crossover 

3500Hz, 20kHz

600Hz, 3500Hz, 20kHz

700Hz, 4kHz, 20kHz

Frequencies

Ultrahigh-Frequency 

3/4" Mylar

®

Dome With Cast-Aluminum Chassis

High-Frequency 

1" Pure-Titanium Dome With Cast-Aluminum Chassis in JBL EOS

Waveguide

Midrange Transducer

N/A

4" PolyPlas

Cone 4" 

PolyPlas

Cone

With Rubber Surround 

With Rubber Surround

and Cast-Aluminum 

and Cast-Aluminum 

Chassis; HeatScape

Chassis; HeatScape

Motor Structure

Motor Structure

Low-Frequency 

5-1/4" PolyPlas

Cone 6" 

PolyPlas

Cone 

Dual 6" PolyPlas

Cones

Transducer(s)

With Rubber Surround 

With Rubber Surround 

With Rubber Surrounds

and Cast-Aluminum 

and Cast-Aluminum 

and Cast-Aluminum

Chassis; HeatScape

Chassis; HeatScape

Chassis; HeatScape

Motor Structure; 

Motor Structure; 

Motor Structures;

Symmetrical Field 

Symmetrical Field 

Symmetrical Field 

Geometry

(SFG

); Geometry

(SFG

); Geometry

(SFG

); 

Oversized Kapton

®

Oversized Kapton

®

Oversized Kapton

®

Voice Coil; Magnetic 

Voice Coil; Magnetic 

Voice Coils; Magnetic

Shorting Ring

Shorting Ring

Shorting Rings

Magnetic Shielding

Yes

Yes

Yes

Baffle

Low Diffraction, IsoPower

Enclosure

Bass-Reflex With 

Sealed

Sealed

Dual FreeFlow

Front-Firing Ports

Network

Straight-Line Signal Path

(SSP

)

Terminals

Gold-Plated 5-Way Binding Posts, Bi-Wirable

Dimensions (H x W x D)

14-1/4" x 12-1/4" x 5"

12-1/4" x 15-1/2" x 5"

12-1/4" x 22" x 5"

(362mm x 311mm x 127mm) 

(311mm x 391mm x 127mm)

(311mm x 559mm x 127mm)

Weight per Speaker

14 lb (6.4kg)

19 lb (8.6kg)

29 lb (13.2kg)

SPECIFICATIONS 

* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. 

We do not recommend sustained operation at these maximum power levels.

All features and specifications are subject to change without notice.

All dimensions include grilles and feet, but not spikes.

Summary of Contents for Studio L810






Reviews: