JBL Studio 590 Owner'S Manual Download Page 13

13

www.jbl.com

English

STUDIO 570 FLOORSTANDING SPEAKER

Speaker type: 

2-way dual-woofer, floorstanding

Low-frequency transducer:

Two 5-1/4" (130mm) PolyPlas cones with Symmetrical Field Geometry™ 
magnet structures, cast frames and rubber surrounds, magnetically 
shielded

High-frequency transducer:

1" (25mm) compression driver with neodymium magnet and one-piece 
Teonex

®

 diaphragm on a glass-filled ABS Bi-Radial

®

 horn, magnetically 

shielded

Recommended amplifier power:

150 watts

Frequency response:

45Hz – 40kHz (–6dB)

Nominal impedance:

6 ohms

Sensitivity (2.83V/1m):

88dB

Crossover frequencies:

1.5kHz

Enclosure type:

Ported

Connector type:

Dual gold-plated binding posts (bi-wire capable)

Available finishes:

Black or cherry

Dimensions (H x W x D):

34-1/16" x 8-7/16" x 11-3/16"  
(896mm x 214mm x 284mm)

Weight:

34.4 lb (15.6kg)

STUDIO 530 BOOKSHELF SPEAKER

Speaker type: 

2-way bookshelf

Low-frequency transducer:

5-1/4" (130mm) PolyPlas cone with Symmetrical Field Geometry™ 
magnet structure, cast frame and rubber surround, magnetically 
shielded

High-frequency transducer:

1" (25mm) compression driver with neodymium magnet and one-
piece Teonex

®

 diaphragm on a glass-filled ABS Bi-Radial

®

 horn, 

magnetically shielded

Recommended amplifier power:

125 watts

Frequency response:

45Hz – 40kHz (–6dB)

Nominal impedance:

6 ohms

Sensitivity (2.83V/1m):

86dB

Crossover frequencies:

1.5kHz

Enclosure type:

Ported

Connector type:

Dual gold-plated binding posts (bi-wire capable)

Available finishes:

Black or cherry

Dimensions (H x W x D):

18-3/8" x 8-7/16" x 8-3/4"  
(467mm x 214mm x 222mm)

Weight:

17 lb (7.7kg)

Summary of Contents for Studio 590


















Reviews: