User Manual
33
15.5 SETTINGS
Auto Standby
The amplifier can be set to automatically conserve power when the audio drops below a
specified level for a specified amount of time. The Auto Standby feature can be enabled or
disabled by using the encoder to select On or Off, then pressing the knob to commit the
change. The threshold level can be set using JBL Performance in the Device Control Panel.
HControl Label
This read-only screen displays the HControl label set in the Performance software’s NetSet-
ter window as the identifier of the device.
101
SRX906LA-400082
HCONTROL: LABEL
V
MAC Address
This displays the device’s MAC address. This address is unique to each product and set at
the JBL factory at the time of manufacturing. This address is not user adjustable.
15.4 HCONTROL
HControl ID (HCID)
If the HControl Lock is set to Unlocked, The HControl ID can be set one digit at a time by
using the encoder to select the desired digit. To change the number, press the knob, rotate
the knob to select the desired value, and press the knob to store the change. Pressing the
Back
button cancels the change to the digit.
Lock ID
The HControl ID lock disables the ability to change the HControl ID. Select the Lock or Un-
lock setting and press the encoder to confirm the setting. Pressing the
Back
button exits
without making a change.
101
00:0A:40:30:00:83
NETWORK: MAC
V
101
HCONTROL: ID
3
00082
V
101
HCONTROL: LOCK
Unlock
Lock
V
Display Brightness
The display brightness can be changed in real time by turning the encoder. Pressing the
Back
button exits to the main menu.
101
SETTINGS: A-STANDBY
On
Off
V
101
SETTINGS: LCD BRIGHT
8
V
Summary of Contents for SRX900 Series
Page 1: ...User Manual ...
Page 51: ......
