JBL SR-X Series User Manual Download Page 6

Three-Way Systems

SR4732X

Dual 12" three-way system: Take the SR4731X, add the high-frequency
sizzle of a 2404 UHF driver and you get the ultimate speaker system for
very high-level music playback in medium to short throw applications. In
combination with the SR4719X subwoofer, this is an unbeatable system
for DJ and dance club applications.

SR4735X

15" three-way system: For long-throw applications

in which the power and additional control of a

horn-loaded cone MF driver is desired, choose the

SR4735X. This system boasts extremely wide

frequency response and is a great choice as an

arrayable, front-of-house reinforcement system.

Subwoofers

SR4718X

Single 18" subwoofer: The single 2241 subwoofer produces

pounding bass down to 30 Hz. A top mounted, 35 mm

diameter socket is provided for an optional pole (JBL model

SS3-BK) to elevate a speaker such as the SR4702X or

SR4722X above your subwoofer. The socket is intended to

accommodate speakers up to 100 lbs (45 kg). Observe the

stand mounting precautions outlined in the "Before You

Begin" section of this User's Guide.

SR4715X

Dual 15" subwoofer: For those who prefer the tight, punchy bass of
a 15" sub, the SR4715X is the answer. The SR4715X has the same
footprint as the other SR-X 15" two-way systems (including the dual
LF models) for tight floor stacking.

SR4719X

Dual 18" subwoofer: Capable of delivering a wall-shaking 136 dB of
acoustical output with a frequency range extending to 25 Hz, the
SR4719X is the choice for large rooms, outdoor performance and
high-level sound reinforcement or music playback. The rectangular
enclosure is ideal for stacking any of the SR-X two-way systems for
those who require uncompromising high-level sound reproduction.

6

Summary of Contents for SR-X Series

















Reviews: