background image

ENGLISH

-2-

Declaration of Conformity

We, JBL Europe A/S

Kongevejen 194B 
DK-3460 Birkerød
DENMARK

declare in own responsibility, that the products described

in this owner's manual are in compliance with technical

standards:

EN 55 013/6.1990

EN 55 020/6.1988

EN 55 022/6.1993

EN 60 065/1994

EN 60 555-2-3/1987/88

We, JBL Europe

2, route de Tours
72500 Château-du-Loir
FRANCE

Luc E. Godard

JBL Europe

FRANCE 07/02

JBL Consumer Products 
250 Crossways Park Drive, Woodbury, NY 11 797
International: 2, route de Tours, 72500 Château-du-Loir, France
www.jbl.com

© 2002 JBL, Incorporated. JBL and Simply Cinema are 
registered trademarks of JBL, Incorporated. 
*Trademarks of Dolby Laboratories.

Part No. YOM200001-0001

CAUTION:

 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Handle the Power Cord Gently

To disconnect the plug from the AC outlet, pull on the plug itself,
not on the cord. Pulling the cord may break the wire.

  Disconnect the plug from the AC outlet whenever the unit is to be

left unused for an extended period of time.

  Do not place furniture or other heavy objects on the cord, and

avoid dropping heavy objects on it. Also, do not make a knot 
in the cord; this can damage it and cause a fire hazard.

The lightning flash with arrowhead 
symbol, within an equalateral triangle, 
is intended to alert the user to the 

presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to 
alert the user to the presence of 

important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Summary of Contents for Simply Cinema ESC 360















Reviews: