background image

9

OPERATION

MIN        MAX

Subwoofer

Level

MIN        MAX

Subwoofer

Level

Move the Master Power
switch (marked “Power” 

¡

)

to the “

” (On) position to use

the subwoofer. The SUB145
subwoofer will automatically
turn on or go into standby
(sleep) mode when left in the
auto mode (“Auto/On” switch

in the “Auto” position).

When your receiver or ampli-
fier is off, or is not sending
program material to the sub-
woofer, the subwoofer will be
in standby mode (LED will be
red). When the subwoofer
senses an audio signal, it will

automatically turn on (LED will
be green). If the subwoofer
does not sense a signal after
approximately twenty minutes,
it will automatically go back
into standby mode.

When the “Auto/On” switch

is switched to the “On”

position, the subwoofer will
remain on, whether or not 
program material is playing.
If you will be away from home
for an extended period of time,
or if the subwoofer will not 
be used, switch the Master
Power switch 

¡

to the Off

position.

VOLUME

POWER

SPEAKER LEVEL

+           –           –           +

SUBWOOFER

LEVEL

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

OUT

IN

L                        R

LINE LEVEL IN

LFE

L

R

AUTO              ON

MIN              MAX 

SUB145

£

¡

IMPORTANT: CONNECT STRIPED WIRE  TO RED (    ) SPEAKER TERMINAL.

GREEN: ON
RED: STANDBY

+

Volume may be adjusted
using the Subwoofer Level
control 

£

as shown.

SCS145.5 OM  7/21/04  12:44 PM  Page 9

Summary of Contents for SCS145.5













Reviews: