JBL SCS SAT500 Owner'S Manual Download Page 2

SCS SAT500, SCS SAT300

Maximum Recommended Amplifier Power 

100 Watts 

Power Handling (Continuous/Peak)

50W/200W

Nominal Impedance 

8 Ohms 

Sensitivity

88dB @ 1 Watt/1 meter

Frequency Response 

100Hz – 20kHz (–6dB)

Tweeter

1/2" (13mm) Titanium-laminate dome, 
video-shielded

Midrange 

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D) (not including shelf stand)

11-1/2" x 4" x 3-1/2" (292mm x 102mm x 89mm) 

Weight

3 lb (1.4kg) 

SCS SAT200

Maximum Recommended Amplifier Power 

100 Watts 

Power Handling (Continuous/Peak)

50W/160W

Nominal Impedance 

8 Ohms 

Sensitivity

86dB @ 1 Watt/1 meter

Frequency Response 

100Hz – 20kHz (–6dB)

Tweeter

1/2" (13mm) Titanium-laminate dome, 
video-shielded

Midrange 

3" (75mm) Driver, video-shielded

Dimensions (H x W x D) (not including shelf stand)

7-1/4" x 4" x 3-1/2" (184mm x 102mm x 89mm) 

Weight

1.75 lb (0.8kg)

SPECIFICATIONS 

Features, specifications and appearance are subject to
change without notice.

Dolby is a registered trademark of Dolby Laboratories.

DTS is a registered trademark of DTS, Inc.

Declaration of Conformity

We, Harman Consumer Group, Inc.

2, route de Tours
72500 Château du Loir
France

declare in own responsibility that the products described in this
owner’s manual are in compliance with technical standards: 

EN 61000-6-3:2001

EN 61000-6-1:2001

Laurent Rault

Harman Consumer Group, Inc.

Château du Loir, France  4/07

DESIGN GOAL:

Bring the thrill of live performance 

and movie sound to the home environment by calling on JBL’s 
professional engineering leadership.

OWNER’S GUIDE

P R O D U C T

L I N E :  

MODELS:

SCS SAT500, SCS SAT300,
SCS SAT200

SURROUND CINEMA
SPEAKERS

© 2007 Harman International Industries, Incorporated.
All rights reserved. 

JBL is a trademark of Harman International Industries,
Incorporated, registered in the United States and/or
other countries. Pro Sound Comes Home is a trademark
of Harman International Industries, Incorporated.

Part No. 406-000-05723-E

PRO SOUND 
COMES HOME

Harman Consumer Group, Inc.

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

516.255.4JBL (4525) (USA only)  

www.jbl.com

SATELLITE TYPE:

Titanium-laminate-dome tweeter,

sealed enclosure

PROFESSIONAL REFERENCE:

Cinema

Loudspeaker Series

SCS-SAT500,300,200 OM  4/25/07  11:39 AM  Page 2

Summary of Contents for SCS SAT500









Reviews: