1. Loosen the 4pcs back panel screws, pull out the back panel;
2. Disconnect the cables which are connected with main board;
(add some white oil on the black glue and wait for 15 seconds of melting time, that will make it easier to disconnect the
cable. If there is no white oil, please be careful when disconnecting the cable.)
b1. Take out the Main board of
soundbar:
Disassembly procedure
a. Tools:
Screw driver
White
oil
scraper knife
3. Loosen the 4pcs main board screws, and take out the Main PCB and the Power PCB.
cable. If there is no white oil, please be careful when disconnecting the cable.)
4. After loosen the 2pcs screws fixed on the key PCB, and 2Pcs on the LED PCB, then could take out the two PCBs.
Notice: Due to there have the risk of damage to the iron grill during the disassembly process, please make sure again
that the speaker needs to be replaced before this operation.
b2.
Disassemble
the iron grill :
4-1
