background image

3

T H A N K   Y O U   F O R   C H O O S I N G   J B L

For more than 50 years,
JBL has been involved in
every aspect of music 
and film recording and
reproduction, from live
performances to the
recordings you play in 
your home, car or office.

We’re confident that the
JBL loudspeakers you
have chosen will provide
every note of enjoyment

that you expected – and
that when you think about
purchasing additional
audio equipment for 
your home, car or office,
you will once again
choose JBL.

Please take a moment to
complete the enclosed
profile card. It enables us
to keep you posted on our
latest advancements, and

helps us to better
understand our customers
and build products that
meet their needs and
expectations.

JBL Consumer Products

Proper placement of the
speakers is an important
step in obtaining the 
most realistic sound-
stage possible. These
recommendations are for

the optimum placement of
the loudspeakers. 
Use them as a guide. Slight
variations will not diminish
your listening pleasure.
All of the Studio Series

loudspeakers are video-
shielded and can safely be
placed near a television.

S P E A K E R   P L A C E M E N T

MODEL: S412P

Without pad

With pad

This model is shipped with
four self-adhesive nonskid
pads that are to be used if
the loudspeaker is placed
on a smooth-surfaced
floor, such as tile or
hardwood. Gently lay the
speaker on its side (not its
front or back) on a soft,

nonabrasive surface.
Attach each pad to the
bottom of its foot in the
widest portion of the
recessed area.
DO NOT attach the pads if
the speaker will be placed
on carpeting.

NEVER

drag the speaker 

to move it, as this will
damage the pads, the feet
and/or the wood cabinet
itself. Always lift the
speaker and carry it to its
new location.

Studio Series-S412P OM  10/19/99  1:00 PM  Page 3

Summary of Contents for S412P









Reviews: