background image

S P E C I F I C A T I O N S

All features and specifications 
are subject to change without notice.

* Trademarks of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

PS1400
Powered Subwoofer

Built-In Amplifier Power Output

400 Watts

Sensitivity (2.83V/1m)

91dB

Frequency Response (–6dB)

28Hz to 130Hz

Crossover Frequency

130Hz

Low-Frequency Transducer

LE14H-3 14" Aquaplas

-cone

woofer with rubber surround, 4"
edge-wound copper voice coil,
and cast-aluminum basket

Baffle

IsoPower™

Ports

2 FreeFlow™ flared

Terminals

5-Way, gold-plated binding posts

Dimensions (H x W x D) 

19" x 20" x 15" 
(483mm x 508mm x 381mm) 
Plus grille and spike feet

Weight 

80 lb (36kg)

PT800 Satellites

Recommended Amplifier 
Power Range

50 – 250 Watts

Nominal Impedance

8 Ohms

Sensitivity (2.83V/1m)

91dB

Frequency Response (–6dB)

80Hz to 22kHz

Crossover Frequencies

650Hz, 3200Hz

High-Frequency Transducer

1" Pure-titanium dome with
rubber surround, shielded, with
EOS

waveguide

Midrange Transducer

4" Titanium inverted dome with
rubber surround and cast-
aluminum basket, shielded

Low-Frequency Transducer

8" Titanium-alloy inverted dome
with rubber surround and cast-
aluminum basket, shielded

Baffle

IsoPower™

Ports

None (sealed enclosure)

Network

Straight-Line Signal Path

(SSP)

Terminals

5-Way, gold-plated binding posts

Dimensions (H x W x D) 

24" x 13-1/2" x 6" 
(610mm x 343mm x 152mm) 
Plus grille

Weight 

37 lb (17kg)

PC600 Center

Recommended Amplifier 
Power Range

50 – 250 Watts

Nominal Impedance

8 Ohms

Sensitivity (2.83V/1m)

91dB

Frequency Response (–6dB)

80Hz to 22kHz

Crossover Frequencies

800Hz,  3500Hz

High-Frequency Transducer

1" Pure-titanium dome with
rubber surround, shielded, with
EOS

waveguide

Midrange Transducer

4" Titanium inverted dome with
rubber surround and cast-
aluminum basket, shielded

Low-Frequency Transducer

Dual, 6," titanium-alloy inverted
domes with rubber surround and
cast-aluminum basket, shielded

Baffle

IsoPower™

Ports

None (sealed enclosure)

Network 

Straight-Line Signal Path

(SSP)

Terminals

5-Way, gold-plated binding posts

Dimensions (H x W x D) 

11-5/8" x 26-7/16" x 7-1/4" 
(295mm x 672mm x 184mm) 
Plus grille 

Weight 

32 lb (15kg)

O W N E R ’ S   G U I D E

P R O D U C T  

L I N E :

Performance

Series

M O D E L S :

PS1400, PT800, PC600

D E S I G N   G O A L :

Bring the thrill of live performance and movie sound to

the home environment by calling on JBL’s professional engineering leadership

T W E E T E R :

1-Inch, Pure-Titanium Dome with Rubber Surround, Mounted

in EOS

Waveguide

M I D R A N G E :

4-Inch, Titanium Inverted Dome with Rubber Surround and

Cast-Aluminum Basket

L O W - F R E Q U E N C Y :

Titanium-Alloy Inverted Dome with Rubber Surround

and Cast-Aluminum Basket in PT800 and PC600; 14-Inch Aquaplas

with

Rubber Surround, 4-Inch Edge-Wound Copper Voice Coil and Cast-Aluminum
Basket in PS1400

P R O F E S S I O N A L   R E F E R E N C E :

Studio Monitor and Cinema 

Loudspeaker Series

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797  USA

8500 Balboa Boulevard, Northridge, CA 91329

800-336-4JBL (4525) (USA only)  

www.jbl.com 

©2001 JBL, Incorporated. 

JBL is a registered trademark of JBL, Incorporated.

Part No. 336608-001

P R O   S O U N D  
C O M E S
H O M E

Summary of Contents for Performance Series PC600





















Reviews: