background image

REMOTE CONTROL

Function and Name

1. Power Button
2. CD Play/Pause / Radio preset 1 Button
3. CD Intro Scan Button / Radio preset 2 Button
4. CD Repeat Track Button / Radio preset 3 Button
5. CD Random play Button / Radio preset 4 Button
6. Radio preset 5 Button / DISC DOWN (CD Changer)
7. Radio preset 6 Button / DISC UP (CD Changer)
8. MOD Button ( Radio - CDP - CDC - AUX )
9. IEQ Button ( FLAT, CLASSIC, POP, ROCK )
10. MUTE Button
11. A.PS Button
12. BAND / LOUD Button
13. SEL (Select) Button
14. Radio Tune UP/DOWN,CD Track UP/DOWN Button
15. VOLUME UP/DOWN Button
16. LOC ( LOCAL ) Button
17. SUB Woofer Button

How to exchange the battery

Open the cover of the back of remote marked Battery.
Place battery as indicated on the back of the remote noting polarity.
* Replacement Battery : CR2025

5

8

Press this button to select Radio, CD, CDC or AUX.
* Note for CDC to function you must add a JBL CD changer.

4."MOD"Button(13)

8.TIME / FREQUENCY (T/F)Button(17)

1) After your unit has been installed in the boat, turn power on.

Radio frequency will appear on the display.

2) Press button once momentarily to display Time mode Immediately.

Press button once again(within 5sec)and hold depressed until displayed
time begins to blink.

3) Press VOL (down) button to set the Minutes
4) Press VOL (up) button to set Hour
5) Once adjustment is completed, press T/F button  once again to lock

memory. Displayed time will stop blinking and within 5 seconds, it reverts
to Radio Frequency.

9. LOC Button (15)

Depressing this button attenuates the tuner's seek sensitivity so that only
clear and strong FM/AM stations can be monitored while seeking.
When this button is released, the tuner monitors all the receivable stations
whether they are clear or not. This function has no control over the tuner's
sensitivity once station is locked on.

5. Loudness function(19)

In order to emphasize the bass and the treble at low volume, press and
hold key for 1second, The display LOUD ON comes up for a short
time and then  reverts to displaying the frequency the station.
The confirmation LOUD is indicated on the display LOUD OFF
comes up for a short time when it 's turned off.

¡

¡

¡

¡

¡

¡

6. Band Function(19)

Press the (BD/LD) button shortly to select the desired band  " FM1, FM2,
FM3, (AM)". However this button works 2 functions, Band(quick press) and
LOUDNESS (longer than 1 second press).

7. IEQ Function (18)

The DSP feature creates a realistic atmosphere for the style of music you
select using the latest digital sound technology. Quite pressing of the key
allows you to select following features :

-
-
-
-
-

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

FLAT
CLASSICS
POP M
ROCK M
IEQ OFF

display -

> press key

display - for the dramatic depth of classical music in an auditorium >

display - f

> press key

display -

> press  key

display - cancel the sound feature

normal operation mode

or the electric excitement of stadium pop

for the subtle extension of the music's dimensions

press key

IEQ

MODE

IEQ

MUTE

AS/PS

4

5

3

2

1

INT

RPT

RDM

DN

DISC

UP

TUNE/TRK

TUNE/TRK

MARINE

6

UP

BAND

SEL

LOC

SWF

DN

5

1

11

8

9

10

2

2

2

3

4

7

6

12

13

14

15

17

16

Summary of Contents for MR-30









Reviews: