background image

Installation

4

1. Precautions

Choose the mounting location carefully so that the unit will not interfere with the 
normal driving functions of the boat. 
Avoid installing the unit where it would be subject to high temperature (such as from 
direct sunlight or hot air) or where it would be subject to dust, dirt or excessive 
vibration. Use only the supplied mounting hardware for a safe and secure installation. 
Be sure to remove the front panel before installing the unit.

2. Mounting angle adjustment

       

Adjust the mounting angle to less than 20 degrees from the horizontal position.  

3. Mounting example

 

    

1

2

4

Release Key

Half Sleeve

Tap

Bend these claws, if necessary.

3

<< Installation in the cabinet >> 

Note

 

Keep the release key in a safe place as you may need it in future to remove 

                the unit from the boat.

5. BD/FN button (5)

In Radio mode, press the BD/FN button (5) will shift FM/AM bands:
FM1      FM2      FM3      AM1      AM2.
In SIRIUS mode, press the BD/FN button (5) to select the SSR1, SSR2, or CATEGORY.

6. DIS button (14)

1) After your unit has been installed in the boat, turn power on, the radio frequency 
    will appear on the display.
2) Press DIS button once to display time mode.
    Press DIS button once again (within 5 seconds) and hold until the displayed time 
    begins to blink.
3) Turn the spindle knob left to set the minutes.
4) Turn the spindle knob right to set the hour.
5) Once the adjustment is completed, press DIS button to accept the adjusted time. 
    If no button is pressed within 5 seconds, then it automatically accepts the adjusted
    time without further intervention from the user.

7.LOUD button (16)

In order to emphasize the bass and the treble at low volume, press the LD (16) button. 
To turn off loudness, press the LD button again.

8. SHIFT / SCROLL button (17)

While in any mode other than SIRIUS, simply press SH.SR to enter SIRIUS mode.
In SIRIUS mode, press SH.SR button to show SHIFT icon on LCD..

 

 

9

Controls (continued)

Summary of Contents for MR-160








Reviews: