-11-
Levels set in one mode will stay
valid for all other modes and are
not independent. Please note
that the status-bar indicator
(27) will not display unless
Adju/– buttons are
pressed. And, while the status-
bar indicator (27) is on, channel
indicators (28) and LVL (29) will
not be displayed. Also, if
adjustments are done in a mode
where a certain channel is not
available, the adjustment step
for that channel is skipped. For
example, in Phantom mode the
center-channel level cannot be
adjusted since Phantom does not
have a center channel. In stereo,
neither the center nor the
surround levels can be adjusted
since Stereo does not feature
surround speakers or a center
speaker. A seventh press of the
Level button will exit the Media
3000 from its level-adjustment
mode.
11. Adjustment
These buttons are used in
conjunction with Test (8), Delay
(9), and Level (10) to increase
or decrease a setting.
12. Bass
Press (+) to increase the level of
low-frequency information.
Press (–) to decrease the level
of low-frequency information.
13. Treble
Press (+) to increase the level of
high-frequency information.
Press (–) to decrease the level
of high-frequency information.
14–17. Input
One of these four indicators will
illuminate, depending on which
input is selected.
18–21. Surround
One of these will illuminate,
depending on which surround
mode is chosen.
22. Dolby Digital
Indicates the presence of a
Dolby Digital-encoded AC-3
digital signal.
23. 5.1-Ch
Works in conjunction with the
Dolby Digital indicator (22).
This indicator illuminates when
the Dolby Digital signal
contains 6 discrete channels of
information (one subwoofer and
five satellite channels).
24. Dolby Pro Logic
Illuminates when Dolby Pro
Logic decoding of a 2-channel
signal is taking place. This
indicator may be on by itself
(when analog inputs are used),
in conjunction with Dolby
Digital (when using a digital
input where the AC-3 format
signal contains two channels
and needs to be decoded into
multichannel) or together with
PCM (when using a digital input
where 2-channel PCM-format
data is being decoded into
multichannel).
25. PCM
Illuminates when the signal
supplied through the selected
digital input is in PCM format.
26. Late Night
Illuminates when the Late Night
compression is selected.
27. Status-Bar Indicator
These LEDS show the relative
setting of volume, bass, treble,
speaker level and speaker delay.
28. Speaker Indicator
Identifies the speaker that’s
being adjusted. LS is Left
Surround, LF is Left Front, C is
Center, RF is Right Front, RS is
Right Surround, and SUB is
Subwoofer.
29. Level
Illuminates when the Media
3000 is in speaker-level
adjustment mode.
30. Delay
Illuminates when the Media
3000 is in speaker-delay
adjustment mode.
31. On
Indicates that the Media 3000 is
fully powered up.
32. Standby
Indicates that the Media 3000 is
plugged into an active wall
outlet and the master switch on
the back panel is in On/Standby
position, but the unit is not
powered on.
33. Mute
Illuminates when the mute
function is activated (the Media
3000 will be on but will not
produce any sound).
