4
Mounting
Wiring connection guide
In many vehicles, you’ll use the factory brackets to secure the receiver in
the dash. Installation methods vary from vehicle to vehicle.
Function
Wire color
Function
Wire color
Function
Wire color
Function
Wire color
ACC power
Red
Parking brake
Light green
Front left s
White
Rear left s
Dark green
Constant power
Yellow
Reverse signal
Violet/white
Front left speaker –
White/black
Rear left speaker –
Green/black
Ground
Black
Optional rear camera
Yellow RCA
Front right s
Gray
Rear right s
Violet
12v out
Yellow/black
Front right speaker –
Gray/black
Rear right speaker –
Violet/black
Installing the Legend CP100 will vary from vehicle to vehicle. You’ll need to
purchase or fabricate a mounting bracket to secure the receiver in the dash of
your vehicle. You’ll also need to purchase a vehicle-specific wiring harness,
or splice the receiver’s wires directly to your vehicle’s power and signal
wires. If you do not have the necessary tools or experience, do not
attempt the installation yourself. Instead, please ask your authorized
JBL car audio dealer about professional installation.
INSTALLATION WARNINGS AND TIPS
IMPORTANT: Disconnect the vehicle’s negative (–)
battery terminal before beginning the installation.
• Always wear protective eyewear when using tools.
• In addition to power and signal connections, you must connect to
your parking brake lead, as certain functions will only operate with
the parking brake engaged.
• Check the height and depth of your vehicle’s dash cavity
(see page 15 for receiver chassis dimensions). Take depth
of any extra cables into consderation.
• When making electrical connections, make sure they are
secure and properly insulated.
