background image

Controls and Adjustments

A

Subwoofer Input

 

L10cs

POLARITY

F

E

D

C

B

A

B

Volume – Adjust level of subwoofer relative to main speakers.

C

Crossover – Adjust between 50 to 150Hz (Set to 150Hz for LFE 

outputs) to blend subwoofer output with main speakers.

D

Polarity – Select between Normal and Reverse to blend subwoofer 

output with main speaker based on room characteristics.

E

Power Mode – ON = Sub is always On

Auto = Powers ON when signal is applied

F

Power Led – Blue = On | Red = Standby

L10CS 10-inch (250mm) 250W RMS Powered Subwoofer Quick Start Guide | Rev 1.0 20221129 | Part No. 950-0632-001 | Features, Specifications, and Appearance subject to 

change without notice.

Harman International Industries, Incorporated.

8500 Balboa Blvd, Northridge CA 91329 United States.

European Representative:

 Harman International Industries, Incorporated.

EMEA Liaison Office, Danzigerkade 16G, 1013 AP Amsterdam, The Netherlands.

UK Business Address:

 Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, HP3 9TD, United Kingdom.

© 2022 Harman International Industries, Incorporated. All Rights Reserved.
JBL is a trademark of Harman International Industries, Incorporated registered in the United States and other countries.

Features, Specifications, and Appearance subject to change without notice.

Pg 2 of 2

Specifications

Subwoofer

 

Low-frequency Transducer

10-inch (250mm) Polycellulose Cone Woofer

Amplifier Power

250W RMS | 500W Dynamic

Frequency Response

32Hz - 150Hz

Crossover Frequencies

50Hz – 150Hz (variable) 24dB/octave

Operation

 

Controls

Auto Power, Crossover, Output Level, Phase, AC Voltage Selection

Connections

LFE (Single RCA-type)

Enclosure type

Bass-Reflex via Rear-Firing Tuned Ports

Power

 

Power requirement:

120V, 60Hz (USA); 220V -240V, 50/60Hz (EU) - Selectable via switch

Power Consumption (Idle/Full/Power):

<0.5W (standby) / 335W/2A (max – 230V) / 335W/4A (max – 120V)

Appearance

 

Cabinet Finish

Black Walnut Wood Veneer | Natural Walnut Wood Veneer

Operating Temperature

32°F (0°C) to 113°F (45°C)

Dimensions and Weight

 

Dimensions (H x W x D)

15.4-inch x 13.3-inch x 15.6-inch | 390mm x 335.4mm x 395.2mm

Weight

31lbs (14.1kg)

MINIMUM SIZE

For models with every external dimension of the product ≤50cm

For models with any external dimension of the product >50cm

Width: 56mm

Width: 70mm

EN

Reviews: