manualshive.com logo in svg

JBL HTI88, Owner'S Manual, Page: 12 / 12

Share
Download
JBL HTI88 Owner'S Manual Download Page 12

DESIGN GOAL:

Combine the superior performance of traditional 

JBL loudspeakers with the convenience of in-wall installation.

WOOFER TYPE:

Polymer-coated aluminum cone with rubber surround

CROSSOVER NETWORK:

Straight-Line Signal Path

™

(SSP

™

)

PROFESSIONAL REFERENCE:

Studio Monitor

OWNER’S GUIDE

PRODUCT LINE: 

MODEL:

HTI88

JBL Home Theater In-Wall Series

© 2005 Harman International Industries, Incorporated. 
All rights reserved. 

JBL is a registered trademark of Harman International
Industries, Incorporated.   

Part No. 406-000-05223

PRO SOUND 

COMES HOME

™

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

516.255.4JBL (4525)  www.jbl.com

NOTE:

For new-construction applications, be sure 

to purchase the HTI88BB back box kit.

Declaration of Conformity

We, Harman Consumer Group International

2, route de Tours 

72500 Chateau-du-Loir

France

declare in own responsibility that the product described in this

owner’s manual is in compliance with technical standards: 

EN 61000-6-3:2001

EN 61000-6-1:2001

Laurent Rault

Harman Consumer Group International

Chateau-du-Loir, France  4/05

All features and specifications are subject to change without notice.

† The maximum recommended amplifier power rating will ensure proper system headroom to allow for 

occasional peaks. We do not recommend sustained operation at these maximum power levels.

* Dolby is a registered trademark of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

HTI88

Frequency Response

30Hz – 100Hz (–6dB) 

Maximum Recommended Amplifier Power 

†

250 Watts per channel

Impedance

8 Ohms nominal per woofer

Sensitivity

94dB (2.83V/1m), both woofers driven

Crossover Frequency

100Hz, 2nd order

Woofer 

Dual 8" polymer-coated aluminum cones w/rubber surrounds

Plate Size (W x H) 

11-7/16" x 20-7/16" (290mm x 518mm)

Mounting Cutout Size (W x H) 

10" x 18-5/16" (254mm x 465mm)

Mounting Depth 

3-7/8" (98mm)

Weight per Speaker 

17 lb (7.7kg)

SPECIFICATIONS 

HTI88 OM  4/19/05  4:43 PM  Page 2

Summary of Contents for HTI88













Reviews:

No comments