JBL HDI-1200P, Owner'S Manual

Page: 8 / 12

E
ng
lis
h
CONNECTING TO A STEREO RECEIVER,
AMPLIFIER OR PREAMPLIFIER
If you are connecting to a stereo device, connect the subwoofer as
shown below. Stereo components rarely have subwoofer outputs. Use
them if they are available; otherwise, be sure to use a Y-connector for the
left output and one for the right output, connecting the subwoofer input to
one side of each Y and the input for the left or right or right main speaker amplifier
to the other side of the Y for proper main speaker operation. You can make either
balanced (XLR) or unbalanced (RCA) connections between the device and the subwoofer.
Using this connection method, you must set the Low Pass Crossover
Stereo Preampli fi er
Use either XLR
or
RCA connector
Use Left
and Right
BALANCED
RIGHT LEFT LEFT
UNBALANCED
RIGHT
OUTPUTS
A
A
T o amplifier for main speaker
(Repeat for other Channel)
A
A
A
knob to some frequency between 50-150Hz, NOT on the “LFE”setting.
www.jblsynthesis.com
6