background image

6

4. PLACE YOUR SOUNDBAR

4a. Place the Soundbar on the table

> 10cm/4”

1m/3ft

2-D=3mm

1

2

≤8 mm/

0.31"

4mm/

0.16"

≥35 mm/1.4"

4

3

4b. Wall mount the Soundbar

Use tape to stick the wall-mounted paper guide on the wall, push 
a pen tip through the center of each mounting hole to mark the 
wall-mounted bracket location and remove the paper.

Screw the wall mount brackets on the pen mark; screw the 
threaded mounting post into the back of the soundbar; then hook 
the soundbar on the wall.

> 10cm/4”

1m/3ft

2-D=3mm

1

2

≤8 mm/

0.31"

4mm/

0.16"

≥35 mm/1.4"

4

3

5. PREPARATIONS

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from 
a distance. 
•  Even if the Remote Control is operated within the effective range 

19.7 feet (6m), remote control operation may be impossible if 
there are any obstacles between the unit and the remote control. 

• If the Remote Control is operated near other products which 

generate infrared rays, or if other remote control devices using 
infra-red rays are used near the unit, it may operate incorrectly. 
Conversely, the other products may operate incorrectly. 

First-time use:

The unit has a pre-installed 
lithium CR2025 battery. Remove 
the protective tab to activate the 
remote control battery.

Replace the Remote 

Control Battery

-  The remote control requires a CR2025, 3V Lithium battery.

1. Push the tab on the side of the battery tray towards the tray.
2. Now slide the battery tray out of the remote control.
3. Remove the old battery. Place a new CR2025 battery into the 

battery tray with the correct polarity (+/-) as indicated.

4. Slide the battery tray back into the slot in the remote control.

Precautions Concerning Batteries

•  When the Remote Control is not to be used for a long time (more 

than a month), remove the battery from the Remote Control to 
prevent it from leaking.

• If the batteries leak, wipe away the leakage inside the battery 

compartment and replace the batteries with new ones.

•  Do not use any batteries other than those specified. 

•  Do not heat or disassemble batteries. 

•  Never throw them in fire or water.

•  Do not carry or store batteries with other metallic objects. Doing 

so could cause batteries to short circuit, leak or explode.

•  Never  recharge  a  battery  unless  it  is  confirmed  to  be  a 

rechargeable type. 

Summary of Contents for Harman CINEMA SB160









Reviews: