JBL EON7 18S, User Manual

Page: 18 / 26

18
Main Menu
•
Pressing the Main/Menu rotary at any time will take you to the EON718S’ main menu. Here, users can access
the main menu functions of the EON718S.
• DBX Driverack output - DriveRack is a line of hardware products produced by Harman’s dbx brand. These
rack mount signal processors provide detailed control for final processing and crossovers before feeding the
mix to one or more speakers. This DriveRack functionality embedded into EON700 is designed to optimize the
combination of speaker and Pass Thru outputs built into this JBL speaker.
•
The Output EQ is a package of filter adjustments on the main mix before the audio feeds to the amp and
speaker. It includes a collection of easy to select preset curves for common subwoofer use cases. Each
preset can also be loaded into the Custom preset for detailed user adjustable of output parametric EQ’s.
The user has adjustments for individual band level, frequency, and width (“Q”).
•
“Output EQ” On/Off enables or bypasses the current settings in the output EQ processor.
•
“Presets” enables rotation of the Main/Menu knob to view and select from the Output EQ presets.
• Scroll the menu to “Presets” and press the MAIN/MENU knob.
• Rotate the MAIN/MENU knob to view the available presets.
• Click the MAIN/MENU knob to load the currently listed preset.
• Users can load the Custom preset, then double click the MAIN/MENU knob to open the Master
EQ editing page. Inside this graph display page you may rotate the MAIN/MENU knob to a
specific parametric EQ number and click the MAIN/MENU knob again to select to edit the gain
(plus or minus in dB), filter frequency, or “Q” (i.e. adjust the filter width.)
• Users can load any preset as a starting point, then scroll down and adjust any setting to
load the current curve as the Custom preset for further editing. A confirmation dialog will
appear, warning the user that doing this will remove the current Custom preset settings
and load it with the currently viewed settings.
• Flat – a flat tuned subwoofer preset
• 80hz – adjusts the subwoofer crossover point to 80hz
• 100hz – adjusts the subwoofer crossover point to 100hz
• 120hz – adjusts the subwoofer crossover point to 120hz
• Wall – adjusts the tuning for the subwoofer to optimize its placement close to a wall
• Corner – adjusts the tuning for the subwoofer to optimize its placement in the corner of a room
• Cardioid – adjusts the tuning, delay and polarity of the subwoofer to optimize its usage in
cardioid mode. For more on this, please see the Cardioid section of the guide.
• Speaker Delay
•
Signal delays are used when multiple speakers are in use but speakers are at different distances from the
audience.
•
Examples:
•
A subwoofer in front of the stage, while this full range speaker in on the stage. In this configuration,
EASYNAV LCD
Intro to the EasyNav LCD