background image

About the EON SUB G2

Applications

To supplement or extend the low frequency output of powered and non-powered full-range speaker
systems.

Features

• 15” Differential Drive

low-frequency driver with dual neodymium magnet for high power handling,

efficiency, and light weight.

• 250 watts actual power delivered to the drivers.
• Balanced loop-through output. 
• Thermomaster

Total Thermal Management System

®

. A single piece, cast-aluminum baffle 

integrates the woofer frame, horn, and amplifier heat-sink. Air movement in the finned ports 
dissipates heat – no internal or external cooling fans are required. 

• Rugged, light weight, black co-polymer enclosure with cast aluminum baffle.
• Integral 35 mm pole mount receptacle with securing thumb screw.
• Extended low-frequency performance. Delivers powerful bass down to 40 Hz.

Technical Specifications

Freq. Range (-10 dB) 

40 Hz – 200 Hz

Crossover Freq.

125 Hz

Maximum SPL 

117 dB, @ 1 m (3.3 ft)

Dimensions (H x W x D) 

686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)

Net Weight 

19.5 kg (43 lbs.)

Driver 

Integral frame with one 15” (380 mm) driver, 
dual neodymium magnet, 2” differential drive voice coil. 

Electronic

Amplifier Rated Power 

250 watts @ 2ohms, 0.1% THD

Input Type

Balanced, differential

Maximum Input Level

Line Level In 

+28 dBu  

Speaker Level In

120 VRMS, speaker level

Input Impedance

Line Level In 

16 ohms line level 

Speaker Level In

143 ohms speaker level

Audio Connectors 

Line Level In 

XLR/F, balanced, line level

Speaker Level In

1/4” Phone, speaker level

Loop Output

XLR/M, balanced, line level

Low Pass Filter

125 Hz Active, 3-pole

AC Input

110 – 230 VAC, selectable, 50 – 60 Hz, 203 watts rating per UL, 
detachable IEC power cable.

Available Accessories

SS2-BK Tripod 

Stand

ESK15 

Suspension Kit for EON 15” models (except EON1500)

BRK15 

Bracket, adapts EON 15” models to OmniMount

®

brackets

EON15 BAG-1

Zippered, plush-lined speaker bag with wheels for EON15” models

EON15 BAG/W-1

Zippered, plush-lined speaker bag for EON15” models

6

Summary of Contents for EON10 G2

























Reviews: