background image

English

Declaration of Conformity

We, Harman Consumer International

2, route de Tours 
72500 Chateau-du-Loir
France

declare in own responsibility, that the products described in
this owner’s manual are in compliance with technical stan-
dards: 

EN 60065:1998
EN 55013:A14/1999
EN 55020/A14:1999
EN 61000-3-2/A14:1999
EN 61000-3-3/1.1995

Gary Mardell

Harman Consumer International

Chateau-du-Loir, France 2/03

© 2003 Harman International Industries, Incorporated 

JBL is a registered trademark of Harman International Industries, Incorporated.

Part No.351248-001

PRO SOUND COMES HOME

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 

8500 Balboa Boulevard, Northridge, CA 91329

2, route de Tours, 72500 Chateau-du-Loir, France

800.336.4JBL (4525) (USA only)  www.jbl.com

* Trademark of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

All features and specifications are subject to change 
without notice.

All dimensions include grilles and feet.

SPECIFICATIONS

E150P

E250P

Amplifier

Power (RMS):

150 Watts

250 Watts

Driver:

250mm (10") PolyPlas™

300mm (12") PolyPlas™

Inputs:

Line Level (switchable to LFE) 

Line Level (switchable to LFE) 

and Speaker Level with

and Speaker Level with

5-way binding posts

5-way binding posts

Outputs:

Speaker Level, High-Pass with

Speaker Level, High-Pass with

5-way binding posts

5-way binding posts

Low-Pass 

Frequency:

Continuously variable 

Continuously variable

from 50Hz – 150Hz

from 50Hz – 150Hz

High-Pass 

Frequency:

150Hz when using 

150Hz when using 

speaker-level output

speaker-level outputs

Frequency

Response:

27Hz – low-pass 

25Hz – low-pass 

crossover setting

crossover setting

Dimensions
(H x W x D):

450mm x 309mm x 384mm

500mm x 365mm x 435mm

Weight:

15.5kg

20.1kg

Summary of Contents for E150P









Reviews: