6
Dolby* Pro Logic* (Non-Digital) – Speaker Level (SCS 140 and SCS 146)
Use this installation method for
Dolby Pro Logic applications
(not Dolby Digital, DTS
®
or
other digital processing), where
the receiver/processor does
not have a subwoofer output, or
a volume-controlled preamp
(line-) level output:
Connect your receiver or
amplifier’s front left and right
speaker terminals to the left
and right terminals on the
subwoofer that are marked
“High Level In.” Connect the
left and right terminals on the
subwoofer that are marked
“High Level Out” to the cor-
responding terminals on the
back of your front left and right
speakers.
Connect your receiver or
amplifier’s center, left and right
surround-speaker terminals to
the corresponding terminals on
the back of your center, left and
right surround speakers.
Right Front
Right Surround
Left Front
Left Surround
Center
+ –
+ –
+ –
+ –
+ –
+ –
+ –
Left Front
Center
+ –
Left Surround
Right Front
+ –
Right Surround
Surround Back
+ –
+ –
Surround Back
+ –
Subwoofer
Receiver
HIGH LEVEL
+ – – +
L R
OUT
IN
Only in 6.1 systems
17214 SCS140_146 DSC Multi OM 29/07/03 15:45 Side 6
